Come on. Sometimes life gets ahead of us and we end up forgetting to do certain tasks. With more urgent matters to attend to, we let swimming pool cleaning slip by the wayside. However, continued neglect of pool maintenance leads to progressive deterioration of water quality as a certain infamous bacterium moves in. You guessed it. Algae. But, what is the easiest way to clean a pool? Especially when you are trying to prepare your pool for winter.
Algae may also grow over the winter if you do not prepare your pool properly so you may want to wait to clean it.
Algae do not require that much time to take hold. What causes algae in a pool? The variant to air circulation, temperature, sunlight exposure, and pH, algae needs between a matter of hours to a few weeks and it is off to the races. With the perfect swimming pool temperatures, at or lower than 51°F, algae will not grow hence it is advised to place a surface cover to let it stay inactive while monitoring for a temperature rise.
Algae require little to thrive. Several micro-organisms, not unlike algae, are summarily placed in the plant phylum. Chlorophyll pigment, which gives them a green color, is used in the capture of energy from the sun in the process called photosynthesis. If you recall, when photosynthesis takes place, carbon dioxide is absorbed and oxygen is exuded by the plant.
Algae can hide in cracks, behind pool ramps and railings, staining the pool liners amongst other places. This compels you to learn how to clean pool liner stains. Therefore, the utmost vigilance is needed to keep it out in the first place. If you’re wondering whether it is safe to swim in a pool with algae, doing so is ill-advised. Swimming in a pool with algae is not advised. A stitch in time saves thousands of gallons of pool refilling when an infestation has taken root.
Given the extent of proliferation of the algal bloom, if you are wondering how to clean a green pool, these are the fundamental steps that can be taken when cleaning an algae infested pool. Finding out what is the easiest way to clean a pool will not only save you time but also energy.
What is the easiest way to clean a pool? First things first, declutter as much organic material as humanly possible. This serves to cut off the algal food source, aiding in the function of the chlorine. Using a telescopic pole, begin by skimming the water surface with the pole net.
Change tact to a deep pole net and scrape the sunken organic debris from the depth of the pool’s bottom. The visibility could be very challenging if the water is indeed cloudy, however, stay the course until the catch from the net diminishes substantively.
A test for CYA (cyanuric acid) is necessary. Special test kits for this are available. CYA prevents the sun from degrading the chlorine. If it falls below 30ppm, radiation from the sun will have a field day picking off all the free chlorine necessary to inhibit algal bloom. You can get the exact figure of how much CYA you’ll need alongside other measurements such as pH and salinity using pool calculators.
No electricity is required. Simply put, shocking the pool means to add shock and chlorine at the same time. With the pH set to 7.2, dump in a 25-pound pail of granular chlorine. You do not just dump it in and go about your business, the application is done with several adjustments over time, hence, it helps save you money when you procure said chlorine in bulk.
Apply the adequate amount of chlorine particles evenly across the water along the boundary of the pool once you calculate the necessary amount of chlorine. You can also add liquid chlorine to a pool. Apply the chlorine evenly over each area around the pool. The pool filtration pumping mechanism should propagate the chlorine throughout the pool.
A noticeable change will be observed 24 hours or so after the addition of chlorine. The green hue of the algae will have disappeared but some cloudiness might be observable due to some dead algae. The pumps should be kept going. Brush the steps, railings, and ramps to slough off any remnant algae for filtration. Removal of dead algae that settles in the depths of your pool, a manual pool vacuum, even a robotic pool vacuum can be used until near-absolute clarity is achieved. Cleaning of the pool filter systems should be done a few times a day while the shock process goes on.
Undertake an overnight chlorine loss test (OCLT) for remnant algae once the water is clear and proper brushing and vacuuming has been carried out. Energy from the sun, as well as remnant algae, will combine to break down your chlorine. Take readings at sunset as well as early the next morning before sunrise.
With the microgreen army at bay, albeit, for now, keep it so! This is not the end of how to clean a pool. Maintain consistent pool water testing at a bare minimum once a week. Stock the cupboard with all the relevant pool water cleaning chemicals you might need. Maintain the CYA, free chlorine, and pH at the preferred thresholds.
Ensure the chlorinating infrastructure at your disposal, be it floater, saline system, in-line, is functional and efficient at maintaining the degree of chlorine needed. Brushing and vacuuming should be done weekly. Regularly clean the filter bags and upgrade when necessary. There is no panacea when it comes to what is the easiest way to clean a pool. The work always goes on.
If you’re wondering what is the easiest way to clean a pool, then proper consideration should be lent to procuring a pool cleaner for better conveni
Decoral is one of the most popular Travel agency for those who want to explore the wold and try to make adventure provide the best design
Call us: (949) 485-3367
Address: 5405 Alton Pkwy, Irvine, CA 92604
Working hours: Mon - Sat 08:00 to 18:00
We design and create atmospheres that you will never want to leave